Just taken offline in good working condition. See attached pictures and information below. Lydall Affinity Brand water-cooled chiller rated to remove up to 23,000 watts (78, 479btu/hr) at a coolant process temperature of 68F (20C). Process fluid temperature range: 39-86F (4-30C).
Process fluid temperature stability: +/- 1F. 5C Process fluid pump will provide up to 8gpm (30.3lpm) at 80psi (5.5bar) available pressure at 100psi (6.9bar) maximum pressure. Process fluid type: Water Dual rated electrical configuration of 208-230 volt (+/-10% variance), three-phase, 60Hz or 200-220 volt (+/- 10% variance), three-phase, 50Hz. Refrigerant type: R-407C Coolant loop: Stainless Steel hard plumbed process coolant loop Fluid conditioning: DI Package: 1.25 Meg ohm-cm Fluid control: Standard external ball valve Process fluid flow sensor: Closed contact at 1gpm/internal flow sensing only Process heater capacity: NA Communications/Signal output: Ambient air temperature: 45-104F (5-40C) Facility water temperature range: 45-95F (5-35C) Compliance: Special Per Customer Requirements CE, S2 certification and F47 Compliant Auto-refill Check valve and solenoid EMO - Latching, Twist to Reset Dual coolant level stack Sealed reservoir CE Marked On Casters - Wheels. Please let us know if you have any questions or concerns.
The item "Affinity Water Cooled Chiller Air GWA-060K-DE09CAS4 Heat Exchanger Lydall" is in sale since Wednesday, June 24, 2020. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Water Baths, Circulators & Chillers". The seller is "starbillias" and is located in Boston, Massachusetts. This item can be shipped worldwide.